The Best Garage door security available on the market today.
Elite Security Supplies offer a wide range of garage door security devices, remember you will get discount on your premium with any Sold Secure or Thatcham approved garage security device fitted.
All of our products are available for shipping worldwide, contact us here.
Our newest products are the Upgraded Garage Door Defender with the Secure A Door Roller Shutter + Up and Over Door Lock.
NEW-Secure A Door Roller Shutter + Up and Over Door Lock
Product Code 318
Unique high security roller shutter door lock using the “ Untouchable “ Sold Secure Gold approved lock. The unit itself is "domestic silver" approved.
Case hardened laser cut product.
Heavy duty 5mm steel.
Flush fitting base locking socket- 130mm depth.
Red powder coat finish.
Lock Tested to a six ton pull.
Multi -disc / anti-drill chrome plated cylinder with dust cover.
Three keys provided.
Backing plate included – zinc plate finish.
Complete with security fixing kit (security bolts and nuts).
Sold Secure pending…
keyed alike locks available.
Pictured left is the unpainted roller shutter lock, attached to an up and over door, the finished unit is the red powder coated unit pictured above.
Elite Security Says:
A superb solution to the problem of locking roller shutter doors, no more securing the draw chain or using flimsy barrel type locks, super stuff.
Bulldog GD400 Garage Door Lock
Ref: GD400
The GD400 Garage Door Lock will fit inside or outside most metal, glass fibre, plastic or wooden garage "up and over" doors and conventional doors, not suitable for roller shutter doors. Comes complete with angle bracket and back plate, ground tube, masonary drill, all fasteners and Bulldog Super Lock Bolt.
Bolt on 'L' shaped bracket to fit to either outside or inside of garage door
Reinforcing plate supplied in kit to strengthen door. 75mm x 110mm, 6mm thick
Uses Bulldog Super Lock Bolt, no padlocks
M10 x 75mm coach bolts supplied for fitting to metal or wooden doors
Lock tube fits flush with ground, no protruding parts
When locked, the garage door is physically held to the ground making prising of the door very difficult
Dust caps provided to prevent dirt and dust ingress into lock and lock tube
Finished in a highly visible yellow powder coating
Garage Door Defender + Armoured Padlock
Product code 302 (New updated model)
A visible and highly effective deterrent to theft from a garage fitted with an 'up and over' door.
As featured in the BBC documentary series "To Catch A Thief"
Certificates
SOLD SECURE BRONZE APPROVED PRODUCT
Reg Design No. 2102501
NEW IMPROVED EASIER TO USE DESIGN
Sterling ASP180 Independent Concealed Armoured Padlock included with three keys supplied.
Defender Unit Locks Onto Solid Steel Base With Padlock to block the tilt action of door.
Simple Ground Fitting In Front Of Garage Door With two Expandable Security Raw bolts included.
Attractive red powder coated finish.
Heavy construction.
Easy to fit within the hour.
Full fitting instructions included.
Every Garage Should Have One.
Made In Britain
For tarmac application see our Built In base unit- please order this unit in preference to the bolt down unit if you have tarmac, block pavers etc- at no extra cost.
Operation
The bar locks onto the anchor unit with a heavy duty, concealed padlock. When locked, the heavy duty bar prevents the garage door from being opened.
Fitment
Fix the solid steel base plate In front of garage door with two expandable security raw bolts provided.The Defender unit then locks onto the steel base with the included Padlock. we recommend 4-5 inches of good solid concrete outside the closed garage door for this application.
The Garage Defender "Master" + lock it circular padlock
Product code 301
A visible and highly effective deterrent to theft from a garage fitted with an 'up and over' door.
Certificates:
SOLD SECURE BRONZE APPROVED PRODUCT
Solid Steel Hardened Shackle less Padlock Included
Simple ground fitting in front of garage door with two expandable security rawlbolts included.
Easy to fit within the hour.
Attractive green powder coated finish.
Defender unit locks onto solid steel base with padlock to prevent the door from forced opening.
Full fitting instructions included.
Made in Britain.
Feature / Benefits of Lock It Circular Shackle less Padlock.
Solid Steel Hardened Round Lock Body.
Protected Shackle.
Diameter = 73mm.
Five Pin Removable Lock Barrel.
High Security Product eliminates cutting and sawing Risks.
Maximum Pick and Pry Resistance.
Superior Corrosion Resistance.
Keyed alike padlocks available at an extra £5.00 per padlock.
For tarmac application see our Built In base unit- please order this unit in preference to the bolt down unit if you have tarmac, block pavers etc- at no extra cost.
Garage Defender "Master" + lock it circular padlock £63.00
Blue Spot Hasp / Lock It Circular Padlock
Product code 314 HEAVY DUTY MULTI-PURPOSE HASP.
Non Handed – For Left Or Right Hand Applications.
Zinc Plated Finish.
Complete With six 8mm x 70mm Coach Bolts, Washers, Nuts.
Key retaining safeguard insures padlock is not left unlocked. Four keys provided.
Complete with six 10mm x 80mm coach bolts/washers/nuts.
Ideal uses include securing: sheds, gates, wooden doors, rear/side van doors, containers, stable/tack room doors etc.
PLEASE NOTE; Due to a increased interest through Secured By Design this product now has Sold Secure approval- this will now enable us to supply an approved product certificate on request.
The Bulldog GR200 Heavy Duty Door Lock is an alternative to hasp and padlock. This multiple use lock utilises Bulldogs proven super lock bolt which is easy to use, highly visible and the ultimate lock for Gates, Workshops and Garage Doors.
Numerous uses: Double Doors, Sliding Doors, Heavy Gates, Containers, etc
Main bosses are 50mm Dia (2”) welded to back plates 75mm x 6mm with holes for fixing bolts
Bulldog Super Lock Bolt supplied to pass through bosses to lock doors (see product info below)
Eight coach bolt fixings M10 x 75mm and nuts and washers supplied
Also included 2 reinforcing plates 110mm x 75mm x 6mm thick for inside of doors
Both left and right hand brackets case hardened to 60 rockwell, 746 VPN
Right hand bracket incorporates an internal groove to retain lock bolt when doors are opened.
Bulldog GR200 Heavy Duty Door Lock £79.25
Bulldog GR700 High Security Door Lock
The Bulldog GR700 High Security Door Lock is designed for use on conventional doors such as tack rooms and stables. This highly visible single door lock comes complete with Bulldogs Super Lock Bolt.
Main boss is 50mm Dia (2”) welded to back plate 75 x 6mm with holes for fixing bolts.
Bulldog Lock Bolt supplied (King Pin type) to pass through boss and into retaining cup.
Retaining cup is inserted into the door frame and held in with two wood screws.
Hole to take receiving cup has to be made 40mm diameter and 40mm deep into the door frame.
Four coach bolt fixings M10 x 75mm supplied also including reinforcing plate for inside of door.
Main boss welded to back plate and Bulldog Lock Bolt are case hardened to resist attack.
Note. Door post needs to be large enough to fit receiving cup without weakening post e.g. 100mm 4”.
If you are looking for a ground anchors, have a look at the extensive range we have. Ground anchors save you money since you can get a discount on your premium.
We aim to deliver a complete "garage security" package, if you cant find what you looking for please contact us and one of our staff will be pleased to help you.
Remember we are your "friendly security chain company", we will give you our honest and objective opinion on any security product, with no hard sell guaranteed.
